We have prepared the following guide to assist you with your electronic file preparation and submission. If you have a specific problem that is not covered in this guide, or have other questions, please feel free to contact us. Improperly prepared files can cause delays in manufacturing.
►Type is legible and crisp.
►Page layout is correct.
►Margins are set.
►Artwork matches the specified dimensions.
►All linked files and images are placed in separate folders or embedded.
►All fonts are outlined.
►Colors in CMYK mode.
►No dimensions and orientation changes of our design template.
►Dieline Templates and your artwork must be in seperate layers.
►Do not flatten the dieline template. Leave it in vector form.
►A minimum of 0.125 inch bleed around the perimeter of your artwork is required.
A 1/8" border must be added to pictures and designs bleeding to the edge, so that there is no white space or border showing around the artwork. It is also important to keep text at least a 3/32" away from the paper edge or the trim line to prevent accidental cropping.
Print previews are not a safe and sure measuring tool for color accuracy. Colors on the file might be effected by monitor calibration, screen resolution and lighting, just to name a few. Many Pantone colors show a marked color shift when converted to four color process.
►All images and pictures should be 300 dpi.
►Rasterized text or logos should be 1200 dpi.
We provide PDF files as electronic soft proofs. These digital proofs intend to show you the layout and design elements of your job, but cannot be a guarantee of color accuracy. If color accuracy is of extreme importance to you, please ask for a hard copy proof.